Electrobath manufacturing device
| The electrobath manufacturing device makes the electrobath used with the grain degree weighing device (electric resistance method counter). As for the electrobath made with the electrobath manufacturing device, a measurement that not only removes the foreign body but also is steady with the grain degree weighing device can be done. A changeable thing can also do the density of electrobath. The aqua pura can be used at any time. The system configuration can be set even in narrow space next to the grain degree weighing device because it divides into three systems (the pure water machine system, the main body of the electrobath manufacturing device, and the sampling tower) and it enters. Electrobath for the grain degree assumption device can be gathered always easily. |
 The control of the density of electrobath that cannot be doneby usual electrobath can be easily done. The temperature of electrobath can be easily controlled by theoption. Because a difficult measurement is steady up to now, it ispossible to measure it. |
Specification / Type
| Main body | IH-260 |
| Sampling tower | IH-HS10E1 |
| Pure water machine | PRO-0100-002 |
| Voltage | 100(V) 50Hz or 60Hz |
| Method of note | Automatic fixed quantity tank of type (programmed control method withsequencer) |
| Three function electrobath pure water automatic layer | |
| Electrobathpure water lowest amount 20 liters.. (arbitrary, manual density) | |
| Pure water ability 140/h(25 degrees in water temperature) | |
| Pump | |
| water current pump | No load 24/27(Litter/Minutes） |
| １（Ａ） 15/18（Litter/Minutes） | |
| ４（Ａ） 18/21（Litter/Minutes） | |
| Mixture Oceki pump | No load 12/14（Litter/Minutes） |
| Timer | Method arbitrariness set of two timers |
| Capacity of tank | 40 (liter) in capacity 60 (liter) specifications in capacity of tank |
| Electrolyte | 400(g) one use for 1(%) Nacl usual electrolyte electrobath. |
| Weight | main body weight About 145 (kg) |
| Main body sizes | 985×460×750 |
| Pure water machine | 500×400×1295 |
| Weight | main body weight About 130 (kg) |
| Pure water machineIndicator | It uses it by turning on in the pure water machine indicator automaticoperation driving. |
| The pump cannot wash RO automatically when turning it off. | |
| そAdditionally, the water quality can be monitored. | |
| The use time of the filter can be managed. | |
| Installed Inventory |  for details |
Contact
Please feel free to contact us by e-mail listed below. Address：info＠woca-jp.com （＠ is listed as double bytes code to avoid spam mail.Please change it to 1 byte code when you send an e-mail to us） |
Others
| 1) The aqua pura of a constant amount automatically enters the tank. A set amount is about 40(liter). The example) When you set the density of electrobath to 0 and 85(%). When this condition dissolves Nacl of 340(g) to the tank setting amount, the density of electrobath is made. Present setting 340(g) ÷40000(cc) ×100≒ 0 and Nacl(g) ÷85 in density (%) of electrobath (cc) ×100 tank capacity ≒(%) Please put 340(g) in the electrolyte. Nacl has the grade, and use the grade of the class or more of one, please. (Please use the high grade as much as possible. ) ※The density of electrobath changes if it makes a mistake in the electrolyte, except for being filled with water of the tank and it puts it. Please exhaust once and make it again when making a mistake. 2) Please confirm it to the aqua pura with the conduction meter of the pure water machine following 1(μS/cm). There is a thing that the measurement data becomes unstable more than this. 3) Five in all is used, and three filters are used for the pure water making. From tap water entrance to activated carbon, RO module, and the order of ion exchange resin it. The use time is the longest and one year from half a year. Please note that the use time changes respectively. When the activated carbons are attentively exchanged, the longevity of the RO module and the ion exchange resin becomes long. The activated carbon plays the role of Prifiltar. When the water quality is bad, the filter is put in the former steps. The exchange time changes into the RO module depending on the water quality. It usually becomes an exchange in one year from about six months though the ion exchange resin depends on the amount of use. 2BS and 4BS main body filter are also similar. ※ The amount of the exhalation of electrobath decreases when the filter is blocked. Moreover, the background goes up suddenly occasionally. (Depend on the microorganism breeding. ) Please prepare the reserve in the filter beforehand. 4) Explanation of each switch of sampling tower The power switch Power supply is turned on and off. There is a leak main switch on the other side of the main body. The power supply doesn't enter if the switch is not turned on. Moreover, the power lamp on the main body table side lights when the main switch is turned on. The pump switch Pump is turned on and off. It uses it by turning on usually. It is an automatic driving. (Operate for five minutes. ) The alarm switch The aqua pura is demanded by the alarm switch alarm. The alarm sound is erased with ON/OFF. It uses it by turning on usually. A timer A sampling duration is set. B timer B sampling duration is set. The amount in which electrobath is taken out of the sample tray is set. It somewhat changes into the guess of the tank. The temperature The temperature of water temperature meter electrobath is displayed. The water temperature in summer of winter is different, and use the usetemperature as much as possible, please 20(℃)30 the(℃) best on a good condition. Moreover, mixing air increases because there is a lot of ..low.. Zon oxygens the water temperature. |